Lillbacka Powerco Oy
P.O.Box 1
FI-62301 Härmä, Finland

+358 6 485 4444 Phone
+358 6 485 4400 Fax

   
Back to product lines

 Serial
 Production
 Model FP20 120 120S 140 140S 145
 Crimping range (mm) 1 10 — 61 10 — 87 10 — 87 10 — 124 10 — 124 10 — 124
 Crimping range (inches) 1 0.39—2.67 0.39—3.42 0.39—3.42 0.39—4.88 0.39—4.88 0.39—4.88
 Crimping force (kN) 1500 2800 2800 3200 3200 3500
 Crimping force (tonnage) 150 280 280 320 320 350
 Crimpings / hour 2 2300 2400 3000 2000 2500 2400
 Max. hose size (inches) 1½ 2 2 2½ / 4 8 2½ / 4 8 2½ / 4 8
 Die set 3 P20 P32 P32 P329/ FP140 P329/ FP140 P329/ FP145
 Maximum opening (mm) 4 +68 +68 +68 +82 +82 +82
 Master die (D / L mm) 99 / 97 99 / 97 99 / 97 140 / 97 140 / 97 140 / 116
 Master die (D / L inches) 3.90 / 3.82 3.90 / 3.82 3.90 / 3.82 5.52 / 3.82 5.52 / 3.82 5.52 / 4.57
 Control UC UC UC UC UC UC
 Motor (kW) 3 5.5 7.5 5.5 7.5 7.5
 Motor (HP) 4.0 7.5 10.0 7.5 10.0 10.0
 QC tool 14 X X X X X X
 Foot pedal 15 O O O O O O
 Control unit: integrated — X X X X X
 Control unit: C1 X O O O O O
 Control unit: C2 — O O O O O
 Back stop device: mechanic O O O O O O
 Back stop device: electric 15 X X X X X X
 Mirror O X X X X X
 UC option pkg I O O O O O O
 UC option pkg II O O O O O O
 UC option pkg III O O O O O O
 Auto greasing G316 O O O O O O
 Side table O O O O O O
 Die set racks O O O O O O
 Connection kit O O O O O O
 Speed adjustment O O O O O O
 Oil cooler O O O O O O
 Pinning support mandrel O O O O O O
 Remotic control unit O O O O O O
 Counter L1, L2, L3 — — — — — —
 Counter18 UC UC UC UC UC UC
 ASCII signal O O O O O O
 Length (mm) 638 1063 / 713 800 1063 / 713 800 1063 / 713
 Width (mm) 757 737 / 705 1270 737 / 705 1270 756 / 705
 Height (mm) 1400 1589 / 1059 1500 1589 / 1059 1520 1589 / 1059
 Length (inches) 25.2 41.9 / 28.1 31.5 41.9 / 28.1 31.5 41.9 / 28.1
 Width (inches) 29.9 29 / 27.8 50 29 / 27.8 50 29.8 / 27.8
 Height (inches) 55.2 62.6 / 41.7 59.9 62.6 / 41.7 59.9 62.6 / 41.7
 Weight (kg) 600 845 / 182 1050 875 / 182 1050 875 / 182
 Weight (lbs) 1323 1863 / 402 2315 1929 / 402 2315 1929 / 402

X = standard    O = optional    — = not available    (1) With standard dies. Crimping range can be increased with special dies.
(2) Theoretical with ½ hose, diameter 10 mm.    (3) See table for die set data.    (4) Maximum opening is the total die travel.
Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with
die set in place.    (5) 12V / 24V. Overload controlled.    (6) 1-phase / 3-phase.    (7) FP140 dies can be used without adapter dies.
(8) Hydraulic hose / industrial hose.    (9) With adapter dies.    (10) Hose cutter.    (11) Full cycle.    (12) Die travel / feeding channel.
(13) NC20, NC30 and NC40 dies can be used.    (14) Available for P20, P32 and CC22 dies.    (15) Not available in MS control.
(16) Technical implementation varies depending on the machine model. Please verify the suitability of the option
from your distributor.    (17) Available in UC models only.    (18) Standard feature in UC models, includes ascending/descending counter.